IS Code for Building Construction Practices
IS 883:1994: Code of practice for the design of structural timber in building
 |
| IS-codes for civil engineering |
IS 1414:1989: Code of practice for fixing wall coverings
IS 1477(Part 1):1971: Code of practice for the painting of ferrous metals in buildings: Part 1 Pretreatment
IS 1477(Part 2):1971: Code of practice for the painting of ferrous metals in buildings: Part 2 Painting
IS 1597(Part 2):1992: Code of practice for construction of stone masonry: Part 2 Ashlar masonry
IS 1634:1992: Code of practice for design and construction of wood stairs for houses
IS 1649:1962: Code of practice for design and construction of flues and chimneys for domestic heating appliances
IS 1834:1984: Specification for hot applied sealing compound for joints in concrete
IS 1905:1987: Code of practice for structural use of unreinforced masonry
IS 2110:1980: Code of practice for in-situ construction of walls in building with soil-cement
IS 2115:1980: Code of practice for flat roof finish: Mud phuska
IS 2116:1980: Specification for sand for masonry mortars
IS 2118:1980: Code of practice for construction of jack-arch type of built-up floor or roof
IS 2119:1980: Code of practice for construction of brick-cum-concrete composite (Madras terrace) floor and roof
IS 2204:1962: Code of practice for construction of reinforced concrete shell roof
IS 2212:1991: Code of practice for brickworks
IS 2250:1981: Code of practice for preparation and use of masonry mortars
IS 2338(Part 1):1967: Code of practice for finishing of wood and wood-based materials: Part 1 Operations and workmanship
IS 2338(Part 2):1967: Code of practice for finishing of wood and wood-based materials: Part 2 Schedules
IS 2366:1983: Code of practice for nail-jointed timber construction
IS 2395(Part 1):1994: Code of practice for painting of concrete, masonry and plaster surfaces: Part 1 Operations and workmanship
IS 2395(Part 2):1994: Code of practice for painting of concrete, masonry and plaster surfaces: Part 2 Schedules
IS 2441:1984: Code of practice for fixing ceiling coverings
IS 2524(Part 1):1968: Code of practice for painting of non-ferrous metals in buildings: Part 1 Pretreatment
IS 2524(Part 2):1968: Code of practice for painting of non-ferrous metals in buildings: Part 2 Painting
IS 2527:1984: Code of practice for fixing rainwater gutters and downpipes for roof drainage
IS 2700:1987: Code of practice for roofing with wooden shingles
IS 2792:1964: Code of practice for design and construction of stone slab over joist floor
IS 2858:1984: Code of practice for roofing with Mangalore tiles
IS 3140:1965: Code of practice for painting asbestos cement building products
IS 3414:1968: Code of practice for design and installation of joints in buildings
IS 3548:1988: Code of practice for glazing in buildings
IS 3629:1986: Specification for structural timber in building
IS 3630:1992: Code of practice for construction of non-load bearing gypsum block partitions
IS 3670:1989: Code of practice for construction of timber floors
IS 4101(Part 1):1967: Code of practice for external facings and veneers: Part 1 Stone facing
IS 4101(Part 2):1967: Code of practice for external facings and veneers: Part 2 Cement concrete facing
IS 4101(Part 3):1985: Code of practice for external cladding: Part 3 Wall tiling and mosaics
IS Code for Cement and Concrete
IS 269:1989: Ordinary Portland cement, OPC 33
IS 383:1970: Coarse and Fine aggregates from natural sources for concrete
IS 455:1989: Portland slag cement
IS 456:2000: Code of practice for plain concrete and reinforced concrete (PCC and RCC)
IS 457:1957: Code of practice for general construction of plain and reinforced concrete for dams and other massive structures
IS 516:1959: Method of test for strength of concrete
IS 650:1991: Specification for standard sand for testing of cement
IS 1343:1980: Code of practice for prestressed concrete
IS 1489(Part 1):1991: Specification for Portland pozzolana cement Part 1 Fly Ash based
IS 1489(Part 2):1991: Specification for Portland-pozzolana cement: Part 2 Calcined clay based
IS 2386(Part 1):1963: Methods of test for aggregates for concrete: Part 1 Particle size and shape
IS 2386(Part 2):1963: Methods of test for aggregates for concrete: Part 2 Estimation of deleterious materials and organic impurities
IS 2386(Part 3):1963: Methods of test for aggregates for concrete: Part 3 Specific gravity, density, voids, absorption and bulking
IS 2386(Part 4):1963: Methods of test for aggregates for concrete: Part 4 Mechanical properties
IS 2386(Part 5):1963: Methods of test for aggregates for concrete: Part 5 Soundness
IS 2386(Part 6):1963: Methods of test for aggregates for concrete: Part 6 Measuring mortar making properties of fine aggregates
IS 2386(Part 7):1963: Methods of test for aggregates for concrete: Part 7 Alkali aggregate reactivity
IS 2386(Part 8):1963: Methods of test for aggregates for concrete: Part 8 Petrographic examination
IS 2502:1963: Code of practice for bending and fixing of bars for concrete reinforcement
IS 3370(Part 1):2009: Code of practice for concrete structures for storage of liquids: Part 1 General requirements
IS 3370(Part 2):2009: Code of practice for concrete structures for storage of liquids: Part 2 Reinforced concrete structures
IS 3370(Part 3):1967: Code of practice for concrete structures for the storage of liquids: Part 3 Prestressed concrete
IS 3370(Part 4):1967: Code of practice for concrete structures for the storage of liquids: Part 4 Design tables
IS 3466:1988: Specification for masonry cement
IS 4926:2003: Ready-mixed concrete – Code of practice
IS 5513:1996: Specification for Vicat Apparatus
IS 5514:1996: Specification for apparatus used in Le-Chatelier test
IS 5515:1983: Specification for compaction factor apparatus
IS 5516:1996: Specification for variable flow type air-permeability apparatus (Blaine type)
IS 5525:1969: Recommendations for detailing of reinforcement in reinforced concrete works
IS 5816:1999: Method of test for splitting tensile strength of concrete
IS 6452:1989: Specification for high alumina cement for structural use
IS 6491:1972: Method of sampling fly ash
IS 7320:1974: Specification for concrete slump test apparatus
IS 7325:1974: Specification for apparatus for determining constituents of fresh concrete
IS 7861(Part 1):1975: Code of practice for extreme weather concreting: Part 1 Recommended practice for hot weather
IS 7861(Part 2):1981: Code of practice for extreme weather concreting: Part 2 Recommended practice for cold weather concreting
IS 8041:1990: Specification for rapid hardening Portland cement
IS 8042:1989: Specification for white Portland cement
IS 8043:1991: Specification for hydrophobic Portland cement
IS 8112:1989: Specification for 43 grade ordinary Portland
IS 8142:1976: Method of test for determining setting time of concrete by penetration resistance
IS 8229:1986: Specification for oil-well cement
IS 9012:1978: Recommended practice for shotcreting
IS 9013:1978: Method of making, curing and determining compressive strength of accelerated cured concrete test specimens
IS 9103:1999: Specification for admixtures for concrete
IS 9142:1979: Specification for artificial lightweight aggregates for concrete masonry units
IS 9284:1979: Method of test for abrasion resistance of concrete
IS 9376:1979: Specification for apparatus for measuring aggregate crushing value and ten percent fines
IS 9377:1979: Specification for apparatus for aggregate impact
IS 9399:1979: Specification for apparatus for flexural testing of concrete
IS 9459:1980: Specification for apparatus for use in measurement of length change of hardened cement paste, mortar and concrete
IS 10262:2009: Guidelines for concrete mix proportioning
IS 10510:1983: Specification for vee-bee consistometer
IS 12269:1987: Specification for 53 grade ordinary Portland
IS 12330:1988: Specification for sulphate resisting Portland
IS 12600:1989: Specification for low heat Portland cement
IS 13311(Part 1):1992: Methods of non-destructive testing of concrete: Part 1 Ultrasonic pulse velocity
IS 13311(Part 2):1992: Methods of non-destructive testing of concrete: Part 2 Rebound hammer
IS 14345:1996: Specification for autoclave apparatus
IS 14687:1999: Guidelines for falsework for concrete structures
IS 14858:2000: Requirements for compression testing machine used for testing of concrete and mortar
IS Code for Lime And Gypsum
IS 712:1984: Specification for building limes
IS 1624:1986: Method of field testing of building lime
IS 1635:1992: Code of practice for field slaking of building lime and preparation of putty
IS 2469:1976: Glossary of terms relating to gypsum
IS 2686:1977: Specification for cinder as fine aggregates for use in lime concrete
IS 2849:1983: Specification for non-load bearing gypsum partition blocks (solid and hollow types)
IS 3068:1986: Specification for broken brick (burnt clay) coarse aggregates for use in lime concrete
IS 3115:1992: Specification for lime-based blocks
IS 3182:1986: Specification for broken brick (burnt clay) fine aggregates for use in lime mortar
IS 4098:1983: Specification for lime-pozzolana mixture
IS 4139:1989: Specification for calcium silicate bricks
IS 5817:1992: Code of practice for preparation and use of lime-pozzolana mixture concrete in buildings and roads
IS 6508:1988: Glossary of terms relating to building lime
IS 8272:1984: Specification for gypsum plaster for use in the manufacture of fibrous plaster boards
IS 9498:1980: Specification for inorganic aggregates for use in gypsum plaster
IS 10049:1981: Code of practice for the manufacture of lime-based blocks.
IS 10359:1982: Code of practice for manufacture and use of lime-pozzolana concrete blocks for paving
IS 10360:1982: Specification for lime-pozzolana concrete blocks for paving
IS 10772:1983: Specification for quick setting lime pozzolana
IS 12654:1989: Code of practice for use of low-grade gypsum in the building industry
IS 12679:1989: Specification for By-product gypsum for use in plaster, blocks and boards
IS 12894:2002: Specification for pulverised fuel ash lime bricks
IS 13001:1991:Guidelines for the manufacture of gypsum plaster in mechanised pan system
IS 14401:1996: Guidelines for handling and storage of building
IS 14860:2000: Guidelines on fuel saving in vertical mixed-feed lime shaft kilns
IS 15648:2006: Specification for pulverised fuel ash for lime-pozzolana mixture applications
IS Code for Doors, Windows And Shutters
IS 1003(Part 1):2003: Timber panelled and glazed shutters: Part 1 Door Shutters – Specification
IS 1003(Part 2):1994: Specification for timber panelled and glazed shutters: Part 2 Window and ventilator shutters
IS 1038:1983: Specification for steel doors, windows and ventilators
IS 1081:1960: Code of practice for fixing and glazing of metal (steel and aluminium) doors, windows and ventilators
IS 1361:1978: Specification for steel windows for industrial buildings
IS 1948:1961: Specification for aluminium doors, windows and ventilators
IS 1949:1961: Specification for aluminium windows for industrial buildings
IS 4020:1998: Door shutters – Methods of tests: Part 1 General
IS 4021:1995: Timber door, window and ventilator frames – Specification
IS 4043:1969: Recommendations for symbolic designations of direction of closing and faces of doors, windows and shutters
IS 4351:2003: Steel door frames – Specification
IS 4913:1968: Code of practice for selection, installation and maintenance of timber doors and windows
IS 6198:1992: Specification for ledged, braced and battened timber door shutters
IS 6248:1979: Specification for metal rolling shutters and rolling grills
IS 10521:1983: Specification for collapsible gates
IS Code for Structural Engineering And Structural Sections
IS 800:2007: Code of practice for general construction in steel
IS 801:1975: Code of practice for use of cold-formed light gauge steel structural members in general building construction
IS 803:1976: Code of practice for design, fabrication and erection of vertical mild steel cylindrical welded oil storage tanks
IS 804:1967: Specification for rectangular pressed steel tanks
IS 805:1968: Code of practice for use of steel in gravity water
IS 806:1968: Code of practice for the use of steel tubes in general building construction
IS 808:1989: Dimensions for hot rolled steel beam, column, channel and angle sections
IS 811:1987: Specification for cold-formed light gauge structural steel sections (revised)
IS 1173:1978: Specification for hot rolled slit steel tee bars
IS 1252:1991: Dimensions of hot rolled steel bulb angles
IS 1730:1989: Dimensions for steel plates, sheets, strips and flats for general engineering purposes
IS 1732:1989: Dimensions for round and square steel bars for structural and general engineering purposes
IS 1852:1985: Rolling and cutting tolerances for hot rolled steel products
IS 2314:1986: Specification for steel sheet piling sections
IS 2750:1964: Specification for steel scaffoldings
IS 3443:1980: Specification for crane rail sections
IS 3908:1986: Specification for aluminium equal leg angles
IS 3909:1986: Specification for aluminium unequal leg angles
IS 3921:1985: Specification for aluminium channels
IS 3954:1991: Hot-rolled steel channel sections for general engineering purposes – Dimensions
IS 3964:1980: Specification for light rails
IS 4000:1992: Code of practice for high-strength bolts in steel structures
IS 5384:1985: Specification for aluminium I-beam
IS 6445:1985: Specification for aluminium tee-sections
IS 7205:1974: Safety code for the erection of structural steel work
IS 7215:1974: Tolerances for fabrication of steel structures
IS 7452:1990: Specification for hot-rolled steel sections for doors, windows and ventilators
IS 8081:1976: Specification for slotted sections
IS 8147:1976: Code of practice for the use of aluminium alloys in structures
IS 8640:1977: Recommendations for dimensional parameters for industrial building
IS 10987:1992: Code of practice for design, fabrication, testing and installation of underground/above ground horizontal cylindrical storage tanks for petroleum products
IS 12778:2004: Hot rolled parallel flange steel sections for beam, columns and bearing pile – Dimensions and section properties
IS 12779:1989: Rolling and cutting tolerances for hot rolled parallel flange beam and column sections
IS 12843:1989: Tolerances for the erection of steel structures
0 Comments